TWRP 2.8 - Omate TrueSmart page

Disclaimer:


Team Win strives to provide a quality product.  However, it is your decision to install our software on your device.  Team Win takes no responsibility for any damage that may occur from installing or using twrp.

Device Specific Known Issues:


  • Battery percent will incorrectly display 50% for the first minute or so.

Android App Install Method (Preferred):


Download the GooManager app from either location:

Install the app and open it.  Tap menu then hit Install OpenRecoveryScript.  Tap Yes.  Verify that the filename displays your device's code name and hit Yes.  The file will download and your device will install the recovery automatically.

Download - Recovery Image Method (using dd):


You must be rooted first. There are root instructions on XDA.

Select the latest .img file from here

Download the above file.  Using adb shell or terminal emulator:

su

dd if=/sdcard/recoveryfilename.img of=/dev/block/recovery

Download - MTK Flash Tool:


If you have a copy of the stock firmware that can be flashed using the MTK flash tool:

Select the latest .img file from here

Download the above file.  Select the scatter file in the MTK flash tool. Select RECOVERY in the list and browse to and change the recovery.img to the file that you downloaded. Uncheck the boxes for all of the other partitions except for recovery. Turn off the watch. Select Options in the MTK flash tool and uncheck the USB option. Attach the watch to the computer. Wait about 3 seconds then select Options and choose a COM port. If your timing was right, only one COM port will show up and it will automatically be selected. If not, unplug the device and try again with selecting the COM port.

Once you get the COM port selected, unplug the device again. Press the download button in the MTK flash tool but do not press Yes. Plug the device back in and wait 3 seconds then click Yes. if you are successful, TWRP will be flashed. If not, start over from the point where you uncheck the USB option and try again.